Repair procedures: Replacement

CAUTION:

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
Take care not to bend or scratch the trim and panels.

Lower the steering wheel.
Using a screwdriver or remover, remove the steering column shroud upper panel (A).

Fig 1: Steering Column Shroud Upper Panel
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the cluster fascia upper panel assembly (A).

Fig 2: Cluster Fascia Upper Panel Assembly
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screw, remove the cluster fascia panel (A).

Fig 3: Cluster Fascia Panel
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Replace any damage clips.