[Center Fascia Lower Panel]

CAUTION:

Put on gloves to protect your hands.

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Remove the center fascia upper panel.
(Refer to "CENTER FASCIA PANEL ")
Using a screwdriver or remover, remove the center fascia lower panel (A).

Fig 1: Center Fascia Lower Panel

G10386597

Courtesy of HYUNDAI MOTOR AMERICA

Install in the reverse order of removal.
IMPORTANT:
- Make sure the connector is connected properly.
- Replace any damage clips.