LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) Battery terminal.
  2. Remove the Upper Shroud (A) with moving down the steering wheel.
    Fig 1: Removing Steering Wheel Upper Shroud
    G10605873Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the Cluster Fascia Upper Panel (A).
    Fig 2: Removing Cluster Fascia Upper Panel
    G10605874Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the Cluster (A) after loosening 4 screws and disconnecting a connector (B).
    Fig 3: Removing Cluster And Connector
    G10605875Courtesy of HYUNDAI MOTOR AMERICA