LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair Procedures >> Inspection >> Tachometer

Repair Procedures: Inspection: Tachometer

  1. Connect the GDS to the Diagnostic Link Connector or install a Tachometer.
  2. With the Engine started, compare the readings of the tester with that of the Tachometer. Replace the Tachometer if the tolerance is exceeded.
    CAUTION:
    1. Reversing the connections of the Tachometer will damage the Transistor and Diodes inside.
    2. When removing or installing the Tachometer, be careful not to drop it or subject it to severe shock.
    Revolution (RPM) Tolerance (RPM) Max 8000 RPM
    Gasoline
    1, 000 ±100
    2, 000 ±100
    3, 000 ±100
    4, 000 ±100
    5, 000 ±100
    6, 000 ±100
    7, 000 ±100
    8, 000 ±100
scientia non olet · About LEMON Manuals