LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators & Gauges >> Instrument Cluster >> Repair Procedures >> Inspection >> Speedometer

Repair Procedures: Inspection: Speedometer

  1. Adjust the pressure of the tires to the specified level.
  2. Drive the vehicle onto a Speedometer Tester. Use Wheel Chocks (A) as appropriate.
  3. Check if the Speedometer Indicator Range is within the standard values.
    CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.
    NOTE: Tire wear and tire over or under inflation will increase the indication error.
    Fig 1: Identifying Wheel Chocks
    G10605865Courtesy of HYUNDAI MOTOR AMERICA

    [KM/H] 

    Velocity (KM/H) Tolerance (KM/H)
    20 + 3.5
    + 0.5
    40 + 4.0
    + 1.0
    60 + 4.7
    + 1.7
    80 + 5.5
    + 2.5
    100 + 6.0
    + 3.0
    120 + 6.5
    + 3.5
    140 + 7.5
    + 4.5
    160 + 8.5
    + 5.5
    180 + 10.0
    + 6.5
    200 + 11.0
    + 7.5
    220 + 12.0
    + 8.5
    240 + 13.0
    + 9.5

    [MPH] 

    Velocity (MPH) Tolerance (MPH)
    20 + 2.5
    + 0.5
    40 + 2.5
    + 0.5
    60 + 3.5
    + 1.5
    80 + 3.5
    + 1.5
    100 + 5.0
    + 3.0
    120 + 7.2
    + 4.8
    140 + 8.2
    + 5.8
    150 + 9.2
    + 6.8
scientia non olet · About LEMON Manuals