LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System (Except HEV) >> Rear Shock Absorber >> Repair Procedures >> Inspection >> Disposal

Repair Procedures: Inspection: Disposal

  1. Fully extend the piston rod.
  2. Drill a hole on the (A) part to remove gas from the cylinder.
Fig 1: Identifying Hole On Part
G10566971Courtesy of HYUNDAI MOTOR AMERICA
NOTE: The gas coming out is harmless but be careful of chips that may fly when drilling.