LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 96 (Weight Classification System Diagnosis (HEV)) >> DTC B1603: CAN Bus Off >> Verification of Vehicle Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scantool and select "Diagnostic Trouble Codes (DTC)" mode
  2. Using a scantool, clear the DTC.
  3. Operate the vehicle within DTC Enable conditions in GENERAL INFORMATION .
  4. Are any DTC present?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is performing to specification at this time.