Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.

Remove the console extension cover (A).

Fig 1: Identifying Console Extension Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the crash pad lower cover (A).

Fig 2: Identifying Crash Pad Lower Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A).

Fig 3: Identifying Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the evaporator temperature sensor connector (A).

Fig 4: Identifying Evaporator Temperature Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the evaporator temperature sensor (A), by pulling it out after rotating it 90° in a counterclockwise direction.

Fig 5: Rotating Evaporator Temperature Sensor
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order or removal.