Handling of Oil
WARNING: This page is about a different variant/trim than selected.
- Do not use the same equipment as mechanical compressor with it.
- Because the electric compressor uses high-voltage, you should use POE oil which have high volumetric resistivity.
- If the oil mixes, dielectric breakdown occurs due to volumetric resistivity decreased. Then, A/C compressor may not work.
- The oil should be free from moisture, dust, metal powder, etc.
- Do not mix with other oil.
- The water content in the oil increases when exposed to the air. After use, seal oil from air immediately. (HFC-134a Compressor Oil absorbs moisture very easily.)
- The compressor oil must be stored in steel containers, not in plastic containers.