LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 92 (Smart Key Unit Diagnosis (HEV)) >> DTC B1689: CAN Time-Out PDM >> Scantool Diagnostics >> Monitor Scantool data

Monitor Scantool data

WARNING: This page is about a different variant/trim than selected.

■ Check DTC 

  1. Check DTC with scantool.
  2. Check DTC related CAN communication is set on PDM.
  3. If there is DTC related PDM, Check the DTC according to DTC INDEX - SONATA HEV article.
  4. Repair and erase the DTC with Scantool.
  5. Is the DTC erased?

    YES 

    • Check poor connection between harness connector and each module.

    : Thoroughly check the looseness, poor connection, bent, corrosion, contamination, deformation or damage of connector. Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Go to next procedure.
scientia non olet · About LEMON Manuals