LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 91 (Hybrid Control System (HEV)) >> Clutch Pressure Sensor (CPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the auxiliary 12V battery negative (-) cable.
  2. Remove the under cover (Refer to "ENGINE AND TRANSAXLE ASSEMBLY ").
  3. Disconnect the sensor connector (A).
    Fig 1: Identifying Clutch Pressure Sensor Connector
    G10590668Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the clutch pressure sensor (A).
    Fig 2: Identifying Clutch Pressure Sensor
    G10590669Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals