Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Connect the GDS to the Data Link Connector (DLC).
Turn the ignition switch ON.
Check the GDS service data of the sensor.
- EV Mode (Engine clutch not operating)
Clutch Oil Pressure: approx. 0

Fig 1: Scantool Display - Current Data (EV Mode; Engine Clutch Not Operating)
Courtesy of HYUNDAI MOTOR AMERICA
- HEV Mode (Engine clutch operating)
  Clutch Oil Pressure: above 0
  
  Fig 2: Scantool Display - Current Data (HEV Mode; Engine Clutch Operating)
  Courtesy of HYUNDAI MOTOR AMERICA