LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 87 (Blower System (HEV)) >> PWM Blower Module >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A).
    Fig 1: Identifying Crash Pad Lower Panel
    G10590568Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the PWM blower module connector (A) and then remove the PWM blower module (B) after loosening the mounting screws.
    Fig 2: Disconnecting PWM Blower Module Connector
    G10590569Courtesy of HYUNDAI MOTOR AMERICA
  4. Install in the reverse order or removal.
scientia non olet · About LEMON Manuals