Repair Procedures: Inspection
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch ON.
- Manually operate the control switch and measure the voltage of the blower motor.
- Select the control switch to raise voltage until the speed gets high.
BLOWER speed Manual Voltage Auto Voltage 1 3.4 Auto Low (4.5V) 2 4.6 4.5 ~ 5.5 3 5.9 5.6 ~ 6.7 4 7.2 6.8 ~ 7.7 5 8.3 7.8 ~ 8.9 6 9.5 9.0 ~ 10.1 7 11.3 10.2 ~ 11.3 8 B+ -