LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 87 (Blower System (HEV)) >> Intake Actuator >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad.

    (Refer to Body - "CRASH PAD ")

  3. Disconnect the intake actuator connector (A).
  4. Loosen the mounting screw and then remove the intake actuator (B).
    Fig 1: Removing Intake Actuator Connector & Mounting Screw
    G10590576Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order or removal.