LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 84 (HEV Control System Diagnosis (HEV)) >> DTC U0101: Lost Communication With TCM (C-CAN) >> General Information >> DTC Detecting Condition

General Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • CAN Signal Check
  1. Poor connection
  2. CAN Communication
  3. Open or short in PCM communication line
Enable Conditions
  • IG ON
  • HCU READY ON
  • Aux. Battery Voltage is between 9V and 16V
Threshold Value
  • No signal via CAN for 0.5~2.0 seconds or receiving Error value
Diagnosis Time
  • 0.5 ~ 2 sec.
DTC
  • 2 Driving Cycle
MIL On Condition
  • 2 Driving Cycle
Service Lamp On Condition
  • 1 Driving Cycle