LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 83 (Body Dimensions (HEV)) >> General Information >> General >> Measurement Method >> Actual-Measurement Dimensions

Actual-Measurement Dimensions

WARNING: This page is about a different variant/trim than selected.
  1. These dimensions indicate the actual linear distance between measurement points, and are the reference dimensions for use if a tracking gauge is used for measurement.
  2. Measure by first adjusting both probes to the same length (A=A').
    CAUTION: Check the probes and gauge itself to make sure there is no free play.
    Fig 1: Identifying Actual Measured Dimension
    G10589428Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals