Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
- Installation is the reverse of removal.
CAUTION:
After replacement or reinstallation procedure of the valve body assembly, you must perform procedures below.
- Adding automatic transaxle fluid.
(Refer to "FLUID )"
- Perform TCM learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to "AUTOMATIC TRANSAXLE CONTROL SYSTEM - SONATA HEV article)
- Bleed air from the hybrid motor cooling system using GDS.
(Refer to "COOLANT )