OPU Terminal Function
WARNING: This page is about a different variant/trim than selected.
OPU CONNECTOR E64A TERMINAL REFERENCE
| Pin | Description |
|---|---|
| 1 | Main relay power |
| 2 | Ground |
| 3 | Motor phase power (U) |
| 4 | Motor phase power (V) |
| 5 | Motor phase power (W) |
OPU CONNECTOR E64B TERMINAL REFERENCE
| Pin | Description |
|---|---|
| 1 | Battery power (+) |
| 2 | Battery power (+) |
| 3 | CAN communication line (Low) |
| 4 | OPU status signal |
| 5 | Hall sensor ground |
| 6 | Hall sensor power (+5V) |
| 7 | IG_Key |
| 9 | CAN communication line (HIGH) |
| 11 | Hall signal A |
| 12 | Main relay operation signal |
| 13 | Ground |
| 14 | Ground |
| 15 | Motor speed command signal |
| 17 | Hall signal B |
| 18 | Hall signal C |