Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the under cover (A).

Fig 1: Identifying Front Under Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the Oil Pump Unit (OPU) connector (A).

Fig 2: Identifying Oil Pump Unit (OPU) Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Oil Pump Unit (OPU) (A).
Tightening torque: 18.6 ~ 27.5 N.m (1.9 ~ 2.8 kgf.m, 13.7 ~ 20.2 lb-ft)

Fig 3: Identifying Oil Pump Unit (OPU)
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.