LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 80 (Active Air Flap Diagnosis (HEV)) >> DTC P1235: Active Air Flap System Fail >> Scantool Diagnostics >> Monitor Scantool Data 1

Monitor Scantool Data 1

WARNING: This page is about a different variant/trim than selected.
  1. Connect scantool to Data Link Connector (DLC).
  2. IG key "ON", Engine "ON".
  3. Warm up the Engine to normal operating temperature.
  4. Monitor Diagnostic Trouble Code and present of trouble code.

    Using a scantool, Check if the same DTC re-sets after clearing DTC.

  5. Are any DTCs present?

    YES 

    • Go to next procedure.

    NO 

scientia non olet · About LEMON Manuals