Removal and Installation

WARNING: This page is about a different variant/trim than selected.

Remove the front muffler (A).
Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

Fig 1: Removing Front Muffler
Courtesy of HYUNDAI MOTOR AMERICA
Remove the catalytic converter (A).

Fig 2: Removing Catalytic Converter
Courtesy of HYUNDAI MOTOR AMERICA
Remove the center muffler (A).
Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

Fig 3: Removing Center Muffler
Courtesy of HYUNDAI MOTOR AMERICA
Remove the main muffler (A).

Fig 4: Identifying Main Muffler
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse order of removal.
NOTE: When installing, replace with new gaskets.