Seat Frame Replacement

WARNING: This page is about a different variant/trim than selected.

Remove the front seat assembly.
Remove the seat back cover.
Remove the seat cushion cover.
After loosening the mounting screw, then remove the front seat shield cover (A).

Fig 1: Loosening Front Seat Shield Cover Mounting Screw
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting bolts, then disconnect the seat back frame (A) and seat cushion frame (B).
NOTE:
- Remove the side air bag for replacing side air bag installation seat.
- Before service, be fully aware of precautions and service procedure relevant to air bag (Refer to GENERAL INFORMATION (RESTRAINTS) - SONATA HEV article)
Tightening torque:

44.1 ~ 58.8 N.m (4.5 ~ 6.0 kgf.m, 32.5 ~ 43.4 lb-ft)

Fig 2: Disconnecting Seat Back Frame And Seat Cushion Frame
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Be sure to perform PODS re-zero with the GDS after replacing parts (passenger's).