LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 61 (Tires/Wheels/Wheel Alignment (HEV)) >> Alignment >> Repair Procedures >> Rear Wheel Alignment >> Camber Adjustment

Camber Adjustment

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the nut holding the rear lower arm cam bolt (B).
  2. Adjust rear camber by turning the rear lower arm cam bolt (B) clockwise or counterclockwise. Rear camber adjustment should be made by turning the right and left cam bolt by the same amount.

    Camber  : -1°±0.5°

    Fig 1: Adjusting Rear Camber By Turning Rear Lower Arm Cam Bolt
    G10589048Courtesy of HYUNDAI MOTOR AMERICA
  3. When completing the rear camber adjustment, tighten the nut to specified torque.

    Tightening torque:  137.3 ~ 156.9 N.m (14.0 ~ 16.0 kgf.m, 101.3 ~ 115.7 lb-ft)

scientia non olet · About LEMON Manuals