Monitor GDS Data
WARNING: This page is about a different variant/trim than selected.
- Park the vehicle on a level surface.
- Set up 'GDS' with 'GDS TPMS'.
- Select the "TPMS" system.
- Execute "DTC Analysis" mode.
- Check the present DTC.
- Are there any DTC's except for 'C1662'?
YES
- Do all repairs associated with detected DTC's.
NO
- Fault is intermittent. It has been repaired and TPMS receiver module memory is not cleared yet.
Go to "VERIFICATION OF VEHICLE REPAIR " procedure.