General Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Engine is in Limp-Home mode
|
- etc. system malfunction
(Additional DTC when APS (Accel. Position Sensor) error etc. hardware check error(P2101, 2118) or TPS start check adaptation (P2119, P0638) or TPS reference voltage(P0652, P0653) or APS reference voltage(P0642, P0643, P0698, P0699) or APS ratio error(P2138) or both TPS1 and TPS2 erroror Level 2 monitoring error detected.)
|
| Enable Conditions |
- The PCM detects etc. system malfunction.
|
| Threshold Value |
|
| Diagnostic Time |
|