Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.

NOTE:

Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not bend or scratch the cover and other parts.

Remove the radiator upper cover mounting bolts and clips.

Fig 1: Removing Radiator Upper Cover Mounting Bolts And Clips
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the front bumper side's mounting screw, then disconnect the side's.

Fig 2: Loosening Front Bumper Side Mounting Screw
Courtesy of HYUNDAI MOTOR AMERICA
Remove the mounting clips.

Fig 3: Removing Mounting Clips
Courtesy of HYUNDAI MOTOR AMERICA
Remove the front bumper after pulling out on the front bumper.
CAUTION:
- When you pull out the front bumper, the font bumper could be damaged by the projection (A).
  
  Fig 4: Pulling Front Bumper Outwards
  Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A).

Fig 5: Identifying Connector
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.