LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 125 (Engine Control System Diagnosis (1 Of 2) (HEV)) >> DTC P0336: Crankshaft Position Sensor 'A' Circuit Range/Performance >> General Information >> DTC Detecting Condition

General Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Signal plausibility check
  1. Open or short in signal, ground or power supply circuit
  2. Poor connection or damaged harness
  3. Damage to the connecting flange/flywheel
  4. Misadjusted crankshaft and camshaft pulley position
  5. Faulty CKP sensor
Enable Conditions
  • Engine synchronized
  • Engine speed > 512rpm
Threshold Value Case 1)
  • Tooth number check (Number of missing/additional teeth > 1)
Case 2)
  • Tooth number check (Number of missing/additional teeth > 2)
Diagnostic Time Case 1)
  • 5 rev.
Case 2)
  • 3 rev.
MIL On Condition
  • 2 Driving Cycles