General Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Short to battery in signal circuit (Feedback Signal)
- Faulty Driver temperature Actuator
- Air Conditioner Control Module
|
| Enable Conditions |
|
| Threshold Value |
- Driver Air mix actuator (Temperature Actuator) sensor signal is at or over 4.9V for 0.3 seconds
|
| Fail-Safe |
- If the Driver set temperature is below 24°C (76.1°F) right before fail detection, Actuator is operated and fixed to Cool Position.
- Actuator is operated and fixed to Warm Position if set temperature is over 25°C (77°F)
|