General Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Open in signal (Feedback signal), power and ground circuit
- Faulty Driver Temperature Actuator
- Faulty Air Condition Control Module
|
| Enable Conditions |
|
| Threshold Value |
- Driver Air mix actuator (Temperature Actuator) Sensor signal is at or below 0.1V for 0.3 seconds
|
| Fail-Safe |
- Setting temperature: 16°C (62.6°F) - 24°C (76.1°F), fix at max. cooling position
- Setting temperature: 25°C (77°F) - 31°C (89.6°F), fix at max. heating position
|