LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 115 (Disc Brake System (HEV)) >> Repair Procedures >> Operation and Leakage Check >> Air Bleeding Tool Removal Procedure

Air Bleeding Tool Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. To remove the SST (09580-3D100) from the vehicle, close the air shut-off valve (A) first.
    Fig 1: Identifying Air Shut-Off Valve
    G10589253Courtesy of HYUNDAI MOTOR AMERICA
  2. After disconnecting the air hose (B), bleed air in the reservoir tank by opening the air shut-off valve (A) slowly.
    Fig 2: Identifying Air Shut-Off Valve And Air Hose
    G10589254Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: To prevent backflow of brake fluid, be sure to open the air shut-off valve slowly then bleed air in the reservoir tank.
  3. Remove the SST hose (B) from the adapter (A).
    Fig 3: Identifying SST Hose And Adapter
    G10589255Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the SST adapter wire (B) unscrewing the wing nut (A).
    Fig 4: Removing SST Adapter Wire & Wing Nut
    G10589256Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the cap of SST (09580-3D100) on the reservoir tank.
    Fig 5: Identifying SST Cap
    G10589257Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals