Rear Brake Pads

WARNING: This page is about a different variant/trim than selected.

Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way.
Tightening torque: 21.6 ~31.4 N.m (2.2 ~3.2 kgf.m, 15.9 ~23.1 lb-ft)

Fig 1: Identifying Guide Rod Bolt And Caliper
Courtesy of HYUNDAI MOTOR AMERICA
Replace pad shim (D), pad retainers (C) and brake pads (B) in the caliper bracket (A).

Fig 2: Identifying Pad Shim, Pad Retainers And Brake Pads
Courtesy of HYUNDAI MOTOR AMERICA