LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 115 (Disc Brake System (HEV)) >> Rear Disc Brake >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Installation is the reverse of removal.
  2. Use a SST (09581-11000) when installing the brake caliper assembly.
    Fig 1: Compressing Brake Caliper Piston Using SST
    G10589307Courtesy of HYUNDAI MOTOR AMERICA
  3. After installation, bleed the brake system.

    (Refer to BLEEDING OF BRAKE SYSTEM )

    NOTE:
    • Do not hit piston end by hammer or prying directly against piston face with screwdriver to push in piston.
    • Using wood or used pad to protect piston end and pushing the wood or pad is recommended.
    • When spreading a piston, SST should be cover all area of piston end face.
scientia non olet · About LEMON Manuals