Front Brake Pads

WARNING: This page is about a different variant/trim than selected.

Remove the brake hose mounting bracket bolt (A).

Fig 1: Identifying Brake Hose Mounting Bracket Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way.
Tightening torque: 21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)

Fig 2: Identifying Guide Rod Bolt And Caliper
Courtesy of HYUNDAI MOTOR AMERICA
Replace pad shim (D), pad retainers (C) and brake pads (B) in the caliper carrier (A).

Fig 3: Identifying Pad Shim, Pad Retainers And Brake Pads
Courtesy of HYUNDAI MOTOR AMERICA