General Information: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Faulty AHB ECU
|
| Enable Conditions |
- When the MCU can't erase or write a data of the EEPROM.
- If the master/slave processor detects abnormal operation in RAM, ROM, interrupt, timer, A/D converter and cycle time
- If the ECU detects abnormal operation in internal power supply
|
| Fail Safe |
- EBD warning lamp and buzzer are activated.
- "Check Brake!" message is displayed on LCD.
|