LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 109 (Cluster Module Diagnosis (HEV)) >> DTC B1562: Fuel Sender ERR >> W/Harness Inspection >> Terminal and Connector Inspection

Terminal and Connector Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Has a problem been found?

    YES 

    NO 

    • Fault is intermittent caused by poor contact in the sensor's and/or CLU's connector. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals