LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 108 (Airbag Modules & Clock Spring (HEV)) >> Passenger Airbag (PAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the glove box housing. (Refer to CRASH PAD ).
  3. Disconnect the passenger airbag connector and remove the PAB mounting bolts.
    Fig 1: Identifying Passenger Airbag Connector
    G10589221Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the crash pad. (Refer to CRASH PAD ).
    NOTE: Replace the crash pad which that has been damaged after the PAB has been deployed.
  5. Remove the heater duct from the crash pad.
  6. Remove the mounting bolts from the crash pad. And then remove the passenger airbag.
    CAUTION: The removed airbag module should be stored in a clean, dry place with the airbag cushion up.
scientia non olet · About LEMON Manuals