Repair procedures: Disassembly

WARNING: This page is about a different variant/trim than selected.

Compress the coil spring with a SST (09546-26000).
Do not compress the spring more than necessary.

Fig 1: Compressing Coil Spring
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the self locking nut (A).

Fig 2: Loosening Self Locking Nut
Courtesy of HYUNDAI MOTOR AMERICA
Remove the insulator assembly (A) and the strut bearing (B).

Fig 3: Removing Insulator Assembly & Strut Bearing
Courtesy of HYUNDAI MOTOR AMERICA
Remove the spring upper seat (A) and pad (B).

Fig 4: Removing Spring Upper Seat & Pad
Courtesy of HYUNDAI MOTOR AMERICA
Remove the dust cover (A) and the bumper rubber (B).

Fig 5: Removing Dust Cover & Bumper Rubber
Courtesy of HYUNDAI MOTOR AMERICA
Remove the coil spring (A) and the spring lower pad (B).

Fig 6: Removing Coil Spring & Spring Lower Pad
Courtesy of HYUNDAI MOTOR AMERICA
Remove the shock absorber (A) from the special tool.

Fig 7: Removing Shock Absorber From Special Tool
Courtesy of HYUNDAI MOTOR AMERICA
Reassembly is the reverse of the disassembly.