Repair procedures: Replacement

WARNING: This page is about a different variant/trim than selected.

Remove the front wheel & tire.
Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Fig 1: Removing Front Wheel And Tire
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: Be careful not to damage to the hub bolts when removing the front wheel & tire.
Loosen the bolt & nut and then remove the lower arm (A).
Tightening torque:

98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

Fig 2: Removing Lower Arm Bolt & Nut
Courtesy of HYUNDAI MOTOR AMERICA
Remove the front lower arm (A) and then loosen the bolts & nuts.
Tightening torque

Front:

137.3~156.9 N.m (14.0~16.0 kgf.m, 101.3~115.7 lb-ft)

Rear:

98.1~117.7 N.m (10.0~12.0 kgf.m, 72.3~86.8 lb-ft)

Fig 3: Removing Front Lower Arm Bolt - 1 Of 2
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Identifying Front Lower Arm Bolt - 2 Of 2
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.