Calibration Procedure: Notes

If the compass has been calibrated or set to variance zone number incorrectly, or you are driving in specific places (tunnel, parking lot in building, underground parking lot, near transformer substation, etc.), the below conditions may occur.

• The display read "C".
• The compass headings become inaccurate.
• The compass heading is not changed.
• Some compass headings are not displayed.
• The compass headings are inaccurate in long distance driving.

  This compass automatically calibrates itself while the vehicle is driven as your route takes you in complete circles. If the vehicle's compass headings become inaccurate continuously, the compass should be manually calibrated as follows: