LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Hybrid Control And Battery System - General Information (HEV)) >> Troubleshooting >> Basic Troubleshooting >> Wire Harness Inspection Procedure

Wire Harness Inspection Procedure

WARNING: This page is about a different car, the 2017 Hyundai Sonata and 2016 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before removing the wire harness, check the wire harness position and crimping in order to restore it correctly.
  2. Check whether the wire harness is twisted, pulled or loosened.
  3. Check whether the temperature of the wire harness is abnormally high.
  4. Check whether the wire harness is rotating, moving or vibrating against the sharp edge of a part.
  5. Check the connection between the wire harness and any installed part.
  6. If the covering of wire harness is damaged; secure, repair or replace the harness.
scientia non olet · About LEMON Manuals