Removal and Installation: Notes

Remove the engine cover.
Disconnect the battery negative terminal.
Disconnect the air duct (A).

Fig 1: Disconnecting Air Duct
Courtesy of HYUNDAI MOTOR AMERICA
Remove the air duct and air cleaner assembly.
Tightening Torque

Hose clamp bolt:

2.9 ~ 4.9N.m (0.3 ~ 0.5kgf.m, 2.2 ~ 3.6lb-ft)

Air cleaner assembly bolts:

7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
1. Disconnect the breather hose (A), RCV hose (B), booster vacuum hose (C) and air intake hose (D).
2. Remove the air cleaner assembly (E).
Fig 2: Identifying Breather Hose, RCV Hose And Air Intake Hose
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.