Battery, Trip Computer, Clock and Audio System Reset
When reconnecting the battery cable after disconnecting, recharging battery after discharged or installing the memory fuse located on the driver's side panel after removing, be sure to reset systems mentioned on the below table.
In addition, when replacing or reinstalling their fuses after removing, they should be reset according to the below table. Please refer to the below table when servicing.
| System | Resetting |
|---|---|
| Trip computer | When the battery is disconnected and reconnected, the set functions of the trip computer become initialized. So, you need to explain this information to the customer. |
| Clock | Whenever the battery terminals or related fuses are disconnected, you must reset the time in audio head unit. (Refer to Audio owner's manual) |
| Audio | When the battery is disconnected and reconnected, the customer's radio stations become initialized. So, you need to record the customer's radio stations prior to service, and after service, set the customer's radio stations into the audio. |