Repair Procedures: Replacement

Tilt up movable glass.
Remove rear glass weather strip (A).

Fig 1: Identifying Rear Glass Weather Strip
Courtesy of HYUNDAI MOTOR AMERICA

Installation is reverse order of the removal procedure.

CAUTION:

Install LH/RH separately and asymmetrical.

Fig 2: Measuring LH/RH Separation
Courtesy of HYUNDAI MOTOR AMERICA

Separation	LH	RH
A	9 mm	15 mm

NOTE:

To apply soapy water on insertion area of rear glass weather strip (B) provide smooth insertion.

Fig 3: Identifying Rear Glass Weather Strip
Courtesy of HYUNDAI MOTOR AMERICA