Initializing Motor
- Perform rest procedure When Start [ON] or motor is running.
- Close enough panorama sunroof glass (about 5 sec) and blind (about 5 sec).
- Hand Off from adjusting lever when glass and blind are closed enough.
- Press adjusting lever (10 sec) until glass and blind is moving a bit once again to sunroof close direction when glass and blind is closed enough.
- Hand Off and press panorama sunroof adjusting lever to close direction then glass and blind is opened and closed [(1) Blind is open in slide mode (2) Sunroof glass is opened and closed in slide mode after tilt (3) Blind is closed] Initializing is done. NEVER hand Off from adjusting lever until finished completely.