Repair Procedures: Inspection

Disconnect the negative (-) battery terminal.
Open the sunglasses case cover from the overhead console then remove the 2 screws holding the overhead console.
Disconnect the switch connector and Map Lamp Connector, and then remove the overhead console lamp (A).

Fig 1: Removing Overhead Console Lamp Screws
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Identifying Overhead Console Lamp Switch Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Check for continuity between the terminals. If the continuity is not as specified, replace the panorama roof switch.

Fig 3: Identifying Panorama Roof Switch Connector Terminals
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Panorama Roof Switch Connector Terminals Sequence
Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Panorama Roof Switch Connector Terminals Continuity Chart
Courtesy of HYUNDAI MOTOR AMERICA