Repair procedures: Replacement

CAUTION:

NOTE:

When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.

Open the fuel filler door cap (A).

Fig 1: Identifying Fuel Filler Door Cap
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting bolts, then remove the fuel filler door (A).
Information
- Pull out from inside of the packing part when removing the fuel filler door housing.
Fig 2: Identifying Fuel Filler Door With Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Information
- Make sure the fuel filler door locks/unlocks and opens/closes properly.
- Replace any damaged clips.