LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Sonata Eco >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Front Bumper And Radiator Grille (Except HEV) >> Radiator Grille >> Repair Procedures >> Replacement

Repair Procedures: Replacement

CAUTION:
  • Put on gloves to protect your hands.
NOTE:
  • When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
  • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Remove the front bumper cover.

    (Refer to: Front Bumper - "FRONT BUMPER COVER ").

  2. Remove the mounting clip (A) and then remove the front bumper energy absorber (B).
    Fig 1: Front Bumper Energy Absorber And Mounting Clip Location
    G10565957Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the pantoscopic camera.

    (Refer to: Body Electrical System - "Pantoscopic Camera").

  4. Loosen the radiator grill mounting screws.
  5. Unlock the lock pins by pushing it up with a screwdriver or remover and then remove the radiator grill (A).
    Fig 2: Identifying Radiator Grill
    G10565958Courtesy of HYUNDAI MOTOR AMERICA
  6. Install in the reverse order of removal.

    Information 

    • Replace any damage clips.
scientia non olet · About LEMON Manuals