Repair procedures: Removal

CAUTION: Put on gloves to protect your hands.

NOTE:

Use seat covers to avoid damaging any surfaces.

Remove the rear pillar trim.
(Refer to Interior Trim - "REAR PILLAR TRIM ")
Loosen the quarter fixed glass (A) mounting nuts.
Tightening torque:

2.9 ~ 3.9 N.m (0.3 ~ 0.4 kgf.m, 2.2 ~ 2.9 lb-ft)

Fig 1: Identifying Quarter Fixed Glass With Mounting Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Cut out the quarter fixed glass sealant using the utility knife.
NOTE:
- Do not scrape down to the painted surface of the body; damaged paint will interfere with proper bonding.
Information

Remove the rubber dam and fastereners from the body.

Mask off surrounding surfaces before painting.