Repair Procedures: Replacement

NOTE:

When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Fold the rear seat back assembly (A) by pulling the folding lever in the direction of the arrow.

Fig 1: Pulling Folding Lever
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Folding Rear Seat Back Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting nut of the rear back armrest after removing the cover (A) using a screw remover.

Fig 3: Identifying Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the rear back armrest (A) in the direction of the arrow.

Fig 4: Removing Rear Back Armrest
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.